Rename to Jules Verne's Mysterious Island

This commit is contained in:
Andrew Miner
2026-10-21 12:23:25 -06:00
parent 7caf75de09
commit 6566d2a2fe
35 changed files with 23645 additions and 81 deletions
+15
View File
@@ -0,0 +1,15 @@
-- Imports & Exports -------------------------------------------------------------------------------
local core = _G["core"]
local path = core.get_modpath("jvmi_mapgen")
-- Registrations -----------------------------------------------------------------------------------
core.register_mapgen_script(path.."/mapenv.lua")
-- Script ------------------------------------------------------------------------------------------
core.log("info", "jvmi_mapgen loaded")
+267
View File
@@ -0,0 +1,267 @@
-- Imports & Exports -------------------------------------------------------------------------------
local core = _G["core"]
local math = _G["math"]
local VoxelArea = _G["VoxelArea"]
-- Since this script runs inside the mapgen environment, the constants won't be in the global table,
-- yet, so we need to run the file manually.
local jvmi_constants_path = core.get_modpath("jvmi_constants")
dofile(jvmi_constants_path.."/constants.lua")
local C = _G["jvmi_constants"]
local A = C.ALTITUDE
-- Constants ---------------------------------------------------------------------------------------
--[[ The amount of overlap (as a perentage of total weight) between adjacent terrain types. ]]--
local TERRAIN_BLEND = 0.15
--[[ The distance from the center of the map at which only the lowest terrain types are used. ]]--
local TERRAIN_RADIUS = 3096
--[[ The noise generator that decides which terrain type is active at a given x,z location. ]]--
local TERRAIN_TYPE_NOISE = core.get_value_noise({
flags = "eased",
lacunarity = 2,
octaves = 1,
offset = 0,
persistence = 0.5,
scale = 1.0,
seed = 8381909047,
spread = { x = 512, y = 512, z = 0 },
})
--[[
A table defining the terrain types used in generating the base terrain.
These must be listed in average altitude order from lowest to highest. The weights are merely
relative values, and can be whatever you like. I find it easiest to think of them as
percentages and choose value which tally to 100.
Bear in mind that noise values are adjusted downward are you approach `TERRAIN_RADIUS` meters
from the center of the map, so these weights are only going to be fully reflected in the terrain
generated at the center of the map, and will progressively favor lower altitudes as you move
toward the edges.
]]--
local TERRAIN_TYPES = {
{ name = "ocean_floor", lowest = A.BEDROCK + 10, highest = A.BEDROCK + 26, weight = 5 },
{ name = "ocean_abyss", lowest = A.ABYSS, highest = A.DEEP, weight = 15 },
{ name = "ocean_shelf", lowest = A.DEEP, highest = A.SHALLOW, weight = 10 },
{ name = "ocean_surface", lowest = A.SURFACE - 4, highest = A.SURFACE, weight = 5 },
{ name = "land_plains", lowest = A.PLAIN - 8, highest = A.PLAIN, weight = 20 },
{ name = "land_hills", lowest = A.HILL - 32, highest = A.HILL, weight = 25 },
{ name = "land_moors", lowest = A.MOOR - 16, highest = A.MOOR, weight = 15 },
{ name = "land_mountains", lowest = A.MOUNTAIN - 80, highest = A.MOUNTAIN, weight = 5 },
}
-- Private -----------------------------------------------------------------------------------------
local private = {
--[[ A shared buffer used to hold raw voxel data during terrain generation. ]]--
data = {}
}
--[[
Compute the altitude of a certain world location from underlying noise generators.
This function uses a set of individual terrain types defined by `TERRAIN_TYPES`. An overall
terrain noise generator (see: `TERRAIN_TYPE_NOISE`) is used to determine which terrain type
should appear at a given location. Each terrain type has its own noise generator, which is
then used to determine the altitude at the given location.
To avoid abrupt lines where we shift from one terrain type to another, the `TERRAIN_BLEND`
factor indicates the percentage overlap between adjacent zones where values from both noise
generators are smoothly blended into a single value.
Finally, we want the map to make up an island with a smooth transition from higher-altitude
terrain in the center to deep ocean terrain at the edges. So, we modify the values from
`TERRAIN_TYPE_NOISE` to force them lower and lower as you move toward `TERRAIN_RADIUS`. By the
time you reach that distance from the center of the islands, the terrain selection will be
pinned to the lowest possible terrain type.
Args:
- pos:vector - the position whose altitude is wanted
Returns:
- an int indicating the highest ground-level block in the x,z coordinate given
]]--
function private.compute_altitude_at(pos)
local radius = TERRAIN_RADIUS
local radius_factor = ((pos.x * pos.x) + (pos.y * pos.y)) / (radius * radius)
radius_factor = math.max(0, math.min(1, 1.0 - radius_factor))
local raw_index = (TERRAIN_TYPE_NOISE:get_2d(pos) + 2) / 2
raw_index = math.max(0, math.min(1, raw_index))
raw_index = raw_index * radius_factor
local band_start = raw_index - TERRAIN_BLEND / 2
local band_end = raw_index + TERRAIN_BLEND / 2
local result = 0
for _, terrain in ipairs(TERRAIN_TYPES) do
local overlap_start = math.max(band_start, terrain.range_start)
local overlap_end = math.min(band_end, terrain.range_end)
local overlap = overlap_end - overlap_start
if overlap > 0 then
local factor = overlap / TERRAIN_BLEND
result = result + factor * terrain.noise:get_2d(pos)
end
end
return math.floor(result)
end
--[[
Fill the lowest layer of the world with bedrock covered by stone.
Args:
- area:VoxelArea - an area calibrated to the area to fill
- fill_min:vector - the minimal corner of the area to fill
- fill_max:vector - the maximal corner of the area to fill
]]--
function private.fill_bedrock(area, fill_min, fill_max)
if fill_min.y > A.BEDROCK then return end
local bedrock_id = core.get_content_id("jvmi_nodes:bedrock")
local stone_id = core.get_content_id("mapgen_stone")
for x = fill_min.x, fill_max.x do
for z = fill_min.z, fill_max.z do
private.data[area:index(x, A.BEDROCK, z)] = bedrock_id
private.data[area:index(x, A.BEDROCK + 1, z)] = stone_id
end
end
end
--[[
Fill in the oceans by replacing air blocks below sea level with water.
Args:
- area:VoxelArea - an area calibrated to the area to fill
- fill_min:vector - the minimal corner of the area to fill
- fill_max:vector - the maximal corner of the area to fill
]]--
function private.fill_ocean(area, fill_min, fill_max)
if fill_min.y > A.SURFACE then return end
local water_id = core.get_content_id("mapgen_water_source")
local y_max = math.min(fill_max.y, A.SURFACE)
local y_min = math.max(fill_min.y, A.BEDROCK)
for x = fill_min.x, fill_max.x do
for y = y_min, y_max do
for z = fill_min.z, fill_max.z do
local index = area:index(x, y, z)
if private.data[index] == core.CONTENT_AIR then
private.data[index] = water_id
end
end
end
end
end
--[[
Fill in base stone terrain using altitude noise.
Args:
- area:VoxelArea - an area calibrated to the area to fill
- fill_min:vector - the minimal corner of the area to fill
- fill_max:vector - the maximal corner of the area to fill
]]--
function private.fill_terrain(area, fill_min, fill_max)
local pos = { x = 0, y = 0, z = 0 }
local stone_id = core.get_content_id("mapgen_stone")
local y_max = math.min(fill_max.y, A.SKY)
local y_min = math.max(fill_min.y, A.BEDROCK)
for x = fill_min.x, fill_max.x do
for z = fill_min.z, fill_max.z do
pos.x, pos.y = x, z
local y_terrain = private.compute_altitude_at(pos)
for y = y_min, math.min(y_max, y_terrain) do
private.data[area:index(x, y, z)] = stone_id
end
end
end
end
--[[
Make a ValueNoise source scaled to a certain altitude range.
Args:
- highest:int - the highest altitude desired in the range
- lowest:int - the lowest altitude desired in the range
Return:
- a ValueNoise object
]]--
function private.make_noise_in_range(lowest, highest)
return core.get_value_noise({
flags = "eased",
lacunarity = 2,
octaves = 5,
offset = lowest,
persistence = 0.5,
scale = (highest - lowest) / 2,
seed = 16552167,
spread = { x = 128, y = 128, z = 0 },
})
end
--[[
Add computed values to the `TERRAIN_TYPES` table.
The table is declared with the fewest values which uniquely define a terrain type, however the
terrain calculation requires a few extra fields to aid in its work. This function adds the
interpreted values: `noise`, `range_start`, and `range_end`.
This function *must* be called prior to the start of map generation.
]]--
function private.prepare_terrain_table()
local total_weight = 0
for _, terrain in ipairs(TERRAIN_TYPES) do
total_weight = total_weight + terrain.weight
end
local start = 0
for index, terrain in ipairs(TERRAIN_TYPES) do
terrain.noise = private.make_noise_in_range(terrain.lowest, terrain.highest)
terrain.range_start = start
terrain.range_end = start + (terrain.weight / total_weight)
if index == 1 then
terrain.range_start = -1 * TERRAIN_BLEND / 2
end
if index == #TERRAIN_TYPES then
terrain.range_end = terrain.range_end + TERRAIN_BLEND / 2
end
start = terrain.range_end
end
end
-- Registrations -----------------------------------------------------------------------------------
core.register_on_generated(function(voxels, fill_min, fill_max)
local emerged_min, emerged_max = voxels:get_emerged_area()
local area = VoxelArea(emerged_min, emerged_max)
voxels:get_data(private.data)
private.fill_terrain(area, fill_min, fill_max)
private.fill_bedrock(area, fill_min, fill_max)
private.fill_ocean(area, fill_min, fill_max)
voxels:set_data(private.data)
voxels:calc_lighting()
voxels:update_liquids()
end)
-- Script ------------------------------------------------------------------------------------------
private.prepare_terrain_table()
+5
View File
@@ -0,0 +1,5 @@
name = jvmi_mapgen
title = Jules Verne's Mysterious Island / Map Generation
description = do the work of actually generating the map
author = tungstonminer
depends = jvmi_nodes